26" x 96", CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS   Our stock number: 10993

26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS

Click on picture below for larger version
26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS
26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS26 x 96 , CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS

MODEL: DE
NEW: 1979

SPECIFICATIONS:
MAX. DIAMETER GROUND....................................... 26"
MAX. DISTANCE BETWEEN CENTERS.............................. 96"
GRINDING WHEELHEAD:
SWIVEL RANGE - LOWER SWIVEL, RIGHT & LEFT.................. 90 DEGREES
UPPER SWIVEL, RIGHT & LEFT.................. 30 DEGREES
GRINDING WHEELS REGULARLY SUPPLIED (DIAMETER X FACE X HOLE) 14" X 1 1/2" X 5"
14" X 1" X 5"
CROSS FEED:
AUTOMATIC INFEED AT TABLE REVERSAL (DIAMETER REDUCTION).... 0.0002" - 0.005"
PICKFEED SELECTIONS: RIGHT END ONLY, LEFT END ONLY......... YES
RIGHT AND LEFT ENDS................... YES
**WHEELHEAD MOVEMENT PER TURN OF CROSSFEED HANDWHEEL: LOW.. 0.050"
HIGH. 0.200"
MINIMUM INFEED INCREMENT IN TERMS OF DIAMETER REDUCTION.... 0.000050"
HEADSTOCK & FOOTSTOCK:
TAPER HOLE IN HEADSTOCK AND FOOTSTOCK SPINDLES............. NO. 10 B & S
RANGE OF WORK ROTATION SPEEDS (+/- 10% ALLOWABLE INF. VAR.) 25 - 200 RPM
(FOOTSTOCK CENTER RETRACTION BY HAND LEVER)
HEADSTOCK SPINDLE NOSE, AMERICAN LATHE STANDARD............ 6"
HEADSTOCK SWIVEL:
TOWARD WHEELHEAD........................................... 90 DEGREES
AWAY FROM WHEELHEAD........................................ 30 DEGREES
TABLE:
NUMBER OF TABLE TRAVERSE SPEEDS............................ INFINITE
RANGE OF TABLE TRAVERSE SPEEDS............................. 3 - 220 IPM
MINIMUM MOVEMENT REQUIRED TO REVERSE TABLE................. 3/32"
ACCURACY OF TABLE REVERSAL AT ALL TRAVERSE RATES........... 0.004"
INDEPENDENT RIGHT-HAND AND LEFT-HAND TARRY ADJUSTMENT...... 0 - 5 SECONDS
MECHANICAL HAND TABLE TRAVERSE PER REV. OF HANDWHEEL: RAPID 15/16"
SLOW. 0.2"
POWER REQUIREMENTS:
WHEELHEAD MOTOR............................................ 5 HP
HYDRAULIC PUMP MOTOR....................................... 1 1/2 HP
HEADSTOCK MOTOR............................................ 1 HP
INTERNAL GRINDING ATTACHMENT MOTOR......................... 2 HP
CUTTING FLUID PUMP MOTOR................................... 1/4 HP

HEIGHT OF MACHINE.......................................... 74"
FLOOR TO SPINDLE CENTER.................................... 49"
MAX. DISTANCE BETWEEN CENTERS.............................. 96"
OVERALL LENGTH............................................. 148"

**DUAL RATIOS FOR CROSSFEED HANDWHEEL APPLY TO STANDARD MECHANICAL
MACHINE ONLY

OUTSTANDING FEATURES AND EQUIPMENT LIST:

VEE ARC HIGH PERFORMANCE VARIABLE MOTOR DRIVE SYSTEMS
SWING DOWN INTERNAL GRINDING ATTACHMENT
LONG REACH INTERNAL SPINDLES
VARIETY OF INTERNAL GRINDING QUILLS
LIVE / DEAD / FULLY VARIABLE WORKHEAD
PLUNGE AND DUAL TERRY GRINDING CYCLES
(3) WORK REST
STAINLESS SPLASH GUARD

UNDER POWER FOR INSPECTION BY APPOINTMENT


SPECIFICATIONS SUBJECT TO VERIFICATION



For a quote on this machine, please complete the form below or contact us directly.

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax:

How did you hear of us?
Additional information on your request:
   

RETURN to complete inventory display       RETURN to our home page