|
|
MODEL: EV
NEW: 1980
SPECIFICATIONS:
DIAMETER OF CHUCK........................ 48"
ADMITS IN DIAMETER....................... 60"
MINIMUM HEIGHT UNDER CROSS SLIDE......... 26"
MAXIMUM HEIGHT UNDER CROSS SLIDE......... 47"
MAXIMUM HEIGHT UNDER TURRET.............. 59"
VERTICAL TRAVEL OF TURRET SLIDE.......... 37"
HORIZ. FEED OF TURRET FROM CHUCK
CENTRE OUTWARDS.......................... 35"
DIAMETER OF TURRET HOLES................. 3"
SPINDLE SPEEDS (12)...................... 6.3 - 140 RPM
FEEDS (12)............................... 0.005 - 0.250 IPR
MAIN MOTOR............................... 40 HP
APPROX. FLOORSPACE REQUIRED.............. 11'8" L x 8'8" W
APPROX. HEIGHT........................... 12'8"
APPROX. WEIGHT........................... 24,000 LBS
FEATURES & EQUIPPMENT LIST:
(1) TURRET TOOLHOLDERS
(1) BORING BAR
(4) CHUCK JAWS
MAIN MOTOR MOUNT WITH MOTOR GAURDING
COOLANT PAN, COOLANT PUMP, & GAURDING
48" DIAMETER FULL TIMKEN BEARING 4-JAW CHUCK
ADJUSTABLE ELEVATING CROSS RAIL W/ POWER CLAMPING
FULLY AUTOMATIC LUBRICATION
EXTERNAL HYDRALIC SYSTEM WITH EASY TO SERVICE FILTRATION
ALL AVAILABLE MANUALS
T.R. WIGGLESWORTH MACHINERY TO PROVIDE THE FOLLOWING SERVICES TO
THE ABOVE MENTIONED MACHINE:
1. MACHINE FREE OF COSMETIC DAMAGE AND/OR OIL LEAKS REPAIRED
(THIS EXCLUDES THE EXISTING WEAR ON THE SLIDE WAYS)
2. NEW HORIZONTAL AND VERTICAL LEADSCREWS AND ADJUSTING NUTS
INSTALLED BRINGING MACHINE WITHIN THE MOST REFINED TOLERANCE THAT
IS POSSIBLE TO PROVIDE A REFURBISHED MACHINE.
3. DISMANTLE OF SLIDES AND CHUCK FOR CLEANING, INSPECTION AND
SERVICE.
4. HYUDRAULIC PUMP UNIT INSPECTED AND SERVICED. HYDRAULIC SUMP OF
THE MACHINE CLEANSED. MACHINE TO BE PROVIDED WITHOUT OIL (READY
FOR FRESH MACHINE OIL).
5. CLEAN AND PAINT MACHINE.
6. ALL MANUALS FOR MACHINE.
7. ALL EXISTING GUARDING CLEANED AND PAINTED AND EMERGENCY STOP
FUNCTIONS.
8. INSTALL NEW NEWALL DRO DP 700 2-AXIS DIGITAL READ OUT SYSTEM
9. INSPECTION AND REPLACEMENT OF ANY PLUGGED OR NON-FUNCTIONING
WAY OILER COMPONENTS.
10. INSPECTION OF BRAKE LININGS AND DRIVE SAFETY CLUTCHES.
REPLACE IF WORN BELOW TOLERANCE OR DAMAGED.
11. INSPECTIONS OF DRIVE BELTS AND SHEAVES. REPLACE BELTS
IF WORN OUT OR DAMAGED.
12. INSPECT AND CLEAN MAG STARTER CONTACTS. REPLACE IF DAMAGED.
13. PROPERLY PREPARED FOR TRANSPORT AND RIGGED ONTO TRUCK.
PAYMENT TERMS:
60% DEPOSIT DUE WITH PURCHASE ORDER
BALANCE DUE PRIOR TO SHIPPING