| Chuck Size | 21" |
| Bar Capacity | 4.5" |
| Control | CNC (FANUC 21I-T) |
MODEL: BARON 60
GENERAL SPECIFICATIONS:
SWING OVER BED, DIAMETER............... 27"
SWING OVER CARRIAGE.................... 20"
DISTANCE BETWEEN CENTERS............... 120"
APPROX. WEIGHT......................... 28,000 LBS
BED:
DESIGN................................. 60 DEG. SLANT, DOUBLE TORQUE TUBE
NUMBER OF WAYS......................... 3
SIZE OF WAYS:
TOP WAY................................ 3.8" X 2.8"
CENTER WAY............................. 4.9" X 1.6"
BOTTOM WAY............................. 3.8" X 1.8"
WIDTH ACROSS WAYS...................... 39.4"
WIDTH ACROSS CARRIAGE WAYS............. 25.3"
NUMBER OF LEGS......................... 5
HEADSTOCK:
HOLE THROUGH SPINDLE................... 4.62"
BAR CAPACITY WITH 12" CHUCK............ 3"
BAR CAP. WITH 15", 18" OR 21" CHUCK.... 4"
SPINDLE NOSE (ASA)..................... A1-11
SPINDLE ID TAPER....................... 500 ASA
SPINDLE CENTER......................... #5 MT
GEAR RANGES, HYDRAULIC CLUTCH CNC...... 3
SPINDLE SPEED RANGES................... 25 - 3000 RPM
SPINDLE SPEED INCREMENT................ 1
CONSTANT SURFACE SPEED................. STANDARD
TAILSTOCK:
LENGTH ON BED.......................... 27"
CENTER SIZE............................ #5 MT
QUILL DIAMETER......................... 5.25"
QUILL TRAVEL........................... 6"
CONTINUOUS THRUST @ 3000 ROM........... 1500 - 5000 LBS
LOAD CAPACITY, PART BETWEEN CENTERS.... 10000 LBS
CARRIAGE:
LENGTH ON BED:
UPPER WAY.............................. 36"
LOWER WAY.............................. 29"
WIDTH ACROSS TURRET SLIDE WAYS......... 19"
TRAVEL................................. 123.5"
BALL SCREW DIAMETER.................... 2.5"
TYPE OF DRIVE.......................... DC-SCR
AXIS THRUST, CONTINUOUS................ 6500 LBS
TRAVERSE RATE.......................... 400 IPM
FEEDRATE RANGE......................... 0 - 200 IPM
FEEDRATE INCREMENT..................... 0.01 IPM
MAX. THREADING RATE.................... 200 IPM
POSITIONING ACCURACY, RANDOM ABSOLUTE.. 0.001"/24"
POSITIONING REPEATABILITY
(UNIDIRECTIONAL)...................... 0.0003"
TURRET SLIDE WAYS...................... 1.8" X 3.8"
TURRET:
TURRET DIAMETER........................ 29.25"
CLAMPING FORCE......................... 40000 LBS
OD TOOL SHANK SIZE..................... 1.5" X 1.5" X 6"
MAX. ID TOOL DIAMETER.................. 2.5"
MAIN MOTOR............................. 50/60 HP
SPECIFICATIONS SUBJECT TO VERIFICATION
FEATURES & EQUIPPED WITH:
FANUC 21i-T CNC CONTROL RETRO-FIT 2011
2) HYDRAULIC STEADY RESTS,
24" 4-JAW CHUCK
FULL ENCLOSURE
FULL LENTH CHIP CONVEYOR
