When the symbol appears you may click on it for a picture and/or detailed specifications. The number enclosed in [] is our stock number.

For a quote or more information on the items shown, check the box at the start of the line and fill in your contact information at the bottom of the screen.

0A7050   AUTOMATIC CHUCKERS, MULT. SPDL._See also Lathe Cat
  1 1/4", ACME GRIDLEY, No. RA-6, SLOT FEED COLLET CHUCKER, [11128]
  1 1/4", ACME GRIDLEY, No. RA-6, BAR MACHINE, WITH CROSS DRILLING ATTACHMENT 5TH [11129]
  1 1/4",NEW BRITAIN, No. 52, 6 SPINDLE BAR MACHINE, BAR FEED, CHIP CONVEYOR [11133]

0B2754   BLAST CLEANING/AIR & SUCTION
  CYCLONE 35" X 55" SAND BLAST, MODEL AC-DC200, 48.5" ROTARY TBL, REGULATOR, DRYER [11090]

0B5500   BORING MILLS, HORIZONTAL, TABLE TYPE
  3", SHIBAURA BT-8DR 1975, 39.4" VERT. 42" CROSS, 12 H.P. , 35.5" x 41.3" Tab [11107]
  4", DEVLIEG 4H-72, 1965, 60" VERTICAL, 72" CROSS, 35" X 72" TABLE, UNDER POWER [11119]
  4", LUCAS 441B-72, 60" VERT., 72" CROSS, #50 TAPER, 42" x 74" TABLE, [10942]
  4", TOS W100A, NEW 2021, DELIVERED & INSTALLED W/ WARRANTY, LOADED WITH FEATURES [11063]
  4", TOS W100A, 1997, 44" VERTICAL, 63" CROSS, FULLY REBUILT 2018, DRO [11216]
  4", UNION BFT 90/3, NEW 1983, 50" VERT., 65" CROSS, 49" X 57" ROTARY TABLE, DRO [10786]
  5", LUCAS 542B120, 96" VERTICAL, 96" CROSS, #50 TAPER, EXCELLENT! [10691]
  5", LUCAS 548, 96" VERT.TRAVEL, 144" CROSS TRAVEL., 140" SADDLE, [10856]

0B5700   BORING MILLS, HORIZONTAL, TABLE TYPE, UNIVERSAL, C
  4", DEVLIEG 43J60, CNC JIG MILL, 60"X-AXIS, 40" Y-AXIS, DELTA DYNA-PATH CONTROL [10721]
  4", MICROCUT, No. HBM-4, FANUC 18I MB, 62" VERT., 86" CROSS TRAVEL, UNDER POWER [10944]
  5", G & L 70-G5-T 3-AXIS, G & L 400 CONTROL, [10722]
  5", TOS WHQ-13N, 2007, 98" VERTICAL, 137" CROSS, 70" X 86" HEIDENHAIN TNC 530 [11030]
  5", TOS WHQ-13N, 2000, 98" VERTICAL, 137" CROSS, 70" X 86" TABLE, HEIDENHAIN [11031]
  6", GIDDINGS & LEWIS, No. MC-60, 8000, 1992, 92" X-AXIS, 74" Y-AXIS, 36" Z-AXIS [11225]

0B6006   BORING MILLS, VERT. (Including Vert. Turret Lathes
  36", WEBSTER BENNETT, No. EV, 1979, 234 R.P.M., THREAD CUTTING ATTACH., [10812]
  36", WEBSTER BENNETT, No. M, 5 TOOL HOLDERS, ANILAM DRO, UNDER POWER. [10895]
  48", WEBSTER BENNETT, No. EH, 48" UNDER RAIL, 100 R.P.M., NEWALL DRO, [11024]
  48", WEBSTER BENNETT, No. EV, 1980, ELEVATING RAIL, [10816]
  48", WEBSTER BENNETT, No. M, 59" SWING, 24" UNDER RAIL, 30 H.P., WELL EQUIPPED [10963]
  52", KING, No. 52, 1955, MAXIMUM SWING 60", 36" UNDER RAIL, UNDER POWER [10451]
  72", WEBSTER BENNETT, No. EM, 4-JAW, 48" UNDER RAIL, DIGITAL READOUTS, TOOLING [10964]
  88", BERTHIEZ, No. BM225, 1978, 177" SWING, 78" UNDER RAIL, 49" RAM STROKE, [10994]

0B6200   BORING MILLS, VERTICAL, N/C & CNC
  108" BULLARD CNC 4-AXIS VERTICAL TURNING & BORING MACHINE, FANUC 16T [11190]

0B7015   BRAKES, PRESS, Hydraulic (Tons)
  500 Ton, PACIFIC 500-12, 1963, [11015]

0C1688   CHIP CONVEYORS
  "MAYFRAN CHIP-TOTE, 1999, USABLE AREA 51" X 17", 11"BELT, 125" OVERALL LENGTH [10948]

0C5901   COORDINATE MEASURING MACHINES (Incl. N/C & CNC)
  HELMEL, MICROSTAR 1272, 2017, 72" WIDE X 120" LONG X 43" UNDER RAIL, RENISHAW [10976]

0C6516   CRANES, HOISTS
  60 Ton, CROSBY STRAIGHT SHANK "HOOK ONLY" 2005 NEW IN BOX, MODEL TA [8507]
  60 Ton, CROSBY STRAIGHT SHANK "HOOK ONLY" 2005 NEW IN BOX, MODEL TA [8508]

0D3749   DRILL SHARPENERS
  SELLERS, No. 4G, 220, 1 H.P., [11130]

0D5700   DRILLS, RADIAL
  4' x 12 5/8", OOYA RADIAL ARM DRILL,NEW 1979, MODEL RE-1225H, POWER CLAMP, NICE [10657]
  4' x 15", KITCHEN & WALKER, 1978, BOX TABLE [10573]
  8' x 19", CARLTON, 1981, RAPID TRAVERSE, 40 H.P. MAIN DRIVE, FULLY AUTO LUBE [10986]
  8' x 19", OOYA, 1979, NO.5M.T. SPINDLE, 10H.P. MAIN SPINDLE DRIVE, [10926]

0G4800   GRINDERS, CYLINDRICAL_UNIVERSAL
  12" x 40", TOYODA, No. GUP28-100, 1988, SWING DOWN ATTCH/NO SPINDLE, EXCELLENT [11215]
  18" x 72", CINCINNATI, UNIVERSAL, SWING DOWN INTERNAL ATTACHMENT BRACKET [10992]
  26" x 96", CINCINNATI MILACRON, DE, 1978, UNIVERSAL, I.D. SWING DOWN, EXTRAS [10993]

0G6606   GRINDERS, INTERNAL
  No. 271, HEALD,SIZEMATIC, LOTS OF TOOLING, NICE CONDITION [7940]

0G8025   GRINDERS, SURFACE, RECIPROC. TABLE (HOR. SPDL.)
  (NEW) KENT INDUSTRIAL 6" X 18" 3-AXIS AUTOMATIC, BEST IN CLASS - BEST PRICE [10724]
  (NEW) (NEW) 6" x 18", SUPERTEC STP-618 II, 3-AXIS FULLY AUTOMATIC SURFACE GRINDER [10307]
  (NEW) KENT INDUSTRIAL 8" X 18" 3-AXIS AUTOMATIC, BEST IN CLASS - BEST PRICE [8850]
  (NEW) KENT INDUSTRIAL 12" X 24" FULLY AUTOMATIC PLC CONTROL, BEST IN CLASS [8853]
  (NEW) KENT INDUSTRIAL 12" X 24" 3-AXIS AUTOMATIC, BEST IN CLASS - BEST PRICE [8852]
  (NEW) KENT INDUSTRIAL 16" X 32" 3-AXIS AUTOMATIC, BEST IN CLASS, BEST PRICE [8854]
  (NEW) KENT INDUSTRIAL 10" X 20" 3-AXIS AUTOMATIC, BEST IN CLASS, BEST PRICE [8851]
  36" x 96", MATTISON [10692]
  (NEW) KENT INDUSTRIAL 6" X 16" MANUAL, BEST IN CLASS - BEST VALUE - BEST PRICE [8849]

0G8080   GRINDERS, SURFACE, ROTARY TYPE (HORIZ. SPDL.)
  (NEW) 24", KENT, No. KGR-600, W/ MITSUBISHI TOUCH SCREEN [11021]
  (NEW) 24", KENT, No. KGR-600-H, MITSUBISHI COLOR GRAPHIC TOUCH SCREEN, VARI-SPEED [10153]

0G8100   GRINDERS, SURFACE, ROTARY TYPE (VERT. SPDL.)
  30", BLANCHARD, No. 18,Model CEDV 10-20841, CHUCK CONTROL, [11026]
  36", BLANCHARD, NO. 18, ELECTRO MAGNETIC CHUCK CONTROL 36" CHUCK [11027]
  36", BLANCHARD, No. 18, ELECTRO MAGNETIC CHUCK CONTROLS, GAURDS [11028]
  84", BLANCHARD, No. 42D-84, 1959, 150 H.P. 36" UNDER WHEEL [10479]

0G9010   GRINDERS, WAY OR RECIPROC. TABLE, HORIZ. SPDL.
  20" x 100", ELB,NEW IN 1974, DUAL SPINDLE / SURFACE & DOVETAIL GRINDER [8905]
  24"X 120", FAVRETTO, NEW IN 1974,20 X 120 MAG, SURFACE & DUAL DOVETAIL WAY GRIND [7847]

0H4500   HOBBERS, SPLINE
  8" x 102", LEES-BRADNER, No. 12, 4" HOB CAP., 24" SWING, 6" SPINDLE BORE. [10969]

0L2150   LATHES, COMBINATION, N/C & CNC
  HAAS SL30BB, HAAS, 14"Chk, 4", 2000, [11146]
  27" x 120" LEBLOND MAKINO BARON 60 FANUC 21I-T, 21"Chk, 4 1/2" BORE,UNDER POWER [11117]
  MAZAK QT250 NEXUS MS, MAZATROL 640T,10"Chk, 3", 2006, SUB SPINDLE, PARTS CATCH [11160]
  20" x 42" MONARCH, METALIST, FANUC 3TF, FAPT, 12"CHK, CONVEYOR, 42" CC, 25 HP [11095]
  MORI-SEIKI DL-150 MC, MSC 518, 6"Chk, 2", 1997, 6-AXIS MULTI TASKER COMBI LATHE [11161]
  MORI-SEIKI DL-150 MC, MSC 518, 6"Chk, 2", 1997, 6-AXIS MULTI TASKER COMBI LATHE [11162]

0L3000   LATHES, ENGINE_See also other Lathe Categories
  (NEW) 17" SERIES ACER "E-LATHE", AVAILABLE IN 40", 60" and 80" CENTER DISTANCES [9540]
  17" x 60" cc, CLAUSING, 3 & 4 JAW CHKS, DORIAN TOOL POST, INCH/METRIC, STEADY [11067]
  18.5" x 52" CC, MONARCH 16CY,407 RPM 14" 4-JAW CHUCK,TAPER [11083]
  21" x 120" cc, CLAUSING COLCHESTER, 2001, VS 15" 4-JAW CHUCK, ROLLER STEADY REST [11115]
  28" x 60" cc, MEUSER, 40" IN GAP, TAPER ATT, 3 & 4 JAW CHUCKS, UNDER PWR, EXCLT! [11043]
  36" x 120" cc, SUMMIT,6" SPINDLE BORE, 24" 3-JAW, STEADY, DRO [10192]
  50" x 210" cc, VDF WOHLENBERG, 1966, 36 5/8" O.C.S., 50 H.P. , NEWALL DRO [10967]
  87" x 687" cc, CRAVEN, 2 CARRIAGES PASSBY STEADIES, OA WIDTH 176", OA LENGTH 74' [11108]

0L3524   LATHES, GAP, SLIDING BED
  40"/132" x 108"/168"cc, LEBLOND, SERVO SHIFT HEADSTOCK, MODEL 4025/66-108" [10780]

0L6530   LATHES, WELDING
  15" x 60", BENTLEY, WELDING LATHE, 10.75" 3-JAW CHUCK, RHEOSTAT DR, NEW CONTROL [11091]

0M0130   MACHINING CENTERS,HORIZ,N/C & CNC(Incl.Pallet Chan
  31.5"X, 29.5"Y, 30.3"Z, MAKINO A-77, 1998, PRO-3 FANUC 16 M, TOMBSTONES [10859]

0M0185   MACHINING CENTERS, VERT., N/C & CNC
  40"X, 20"Y, 25"Z, HAAS VF-3, 1996, 8" 4th AXIS INDEXER, RENISHAW PROBE SYSTEM [11212]
  40"X, 20"Y, 25"Z, HAAS VF-3, 1995, [11222]
  60"X, 29"Y, 26"Z, OKK VM-7, 2002, M635 CNC CONTROL, CAT 40 GEARED HEAD, 8000 RPM [10990]

0M2824   MILLERS, VERTICAL
  3VKH, ACER, 1995, 10" X 50" TABLE, SQUARE SADDLE WAYS, 3 H.P., UNDER POWER [11074]
  ACER, 3VKH, 1994, 10" x 50" TABLE, 3 H.P., SQUARE SADDLE WAYS, UNDER POWER [11073]
  (NEW) (NEW) ACER E-MILL 6VK 12" x 60" TABLE, 5 H.P., #40 TAPER SPINDLE [10455]
  (NEW) ACER REPLACEMENT MILLING HEAD (NEW), 3 H.P."E-MILL", VECTOR FREQUENCY DRIVE [10668]
  (NEW) ACER REPLACEMENT MILLING HEAD (NEW), 5 H.P."E-MILL" , VECTOR FREQUENCY DRIVE [10980]

0P6209   PRESSES, O.B.I., FLYWHEEL, SINGLE CRANK
  150 Ton, MINSTER, 6" STRK, 6" SH HT, 4" BOLSTER, AIR CLUTCH, CUSHIONS, UND PWR [11047]

0S0653   SAWS, BAND, HORIZONTAL
  18" x 18", KASTO-RACINE PBA-46040,, 16" X 42" ROLLER TABLE [11080]

0T0140   TABLES, ROTARY
  30" x 40", DEVLIEG, TYPE AM, MODEL RT3610, 8 POSITION SHOT PIN, AIR LIFT TABLE [11208]
  36" x 48", FIVE "K" BRAND, ROTARY TABLE WITH AIR LIFT, EXCELLENT CONDITION ! [10576]
  60" X 72" GIDDING & LEWIS ROTARY TABLE WITH HYDROSTADIC LIFT, HEAVY CAPACITY! [10313]
  84" x 120", LUCAS ROTARY TABLE WITH AIR LIFT, NEW 1981, EXCELLENT CONDITION ! [9642]

0T3953   TOOLING & ACCESS._See also Specific Categories
  ANGLE PLATES, 48" TALL, 14" WIDE, 18" DEEP, HEAVY DUTY BOX WELD CONSTRUCTION [11134]
  ANGLE PLATE, 36" TALL, 36" WIDE, T-SLOTTED, HEAVY DUTY CONSTRUCTION, NICE! [11135]
  14" x 48" ANGLE PLATE, FABRICATED, T-SLOTTED, SCRAPED IN, PAINTED, VERY NICE ! [11077]
  ANGLE PLATE, 96" TALL, 36" WIDE, 36" DEPTH, HEAVY DUTY CONTSTRUCTION, EXCELLENT! [9714]
  ANGLE PLATES, 33" x 106" SLOTTED HEAVY DUTY, SET OF TWO, FOUR PEICES, VERY NICE [10733]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, (MODIFIED) , 48", 60" & 72" VTL'S [10917]
  BOLSTER PLATE, STEEL, PRESS OR MACHINE FLOOR PLATE, 21" x 48" x 2", (4) T-SLOTS [10511]
  BORING BAR, KENNAMETAL, TURNING, 12 1/4" OAL., 1 1/2" DIAMETER, VERY NICE [11211]
  BORING BAR, NO NAME, VTL, 16 1/4" OAL, 3" DIA., 45, 90 & 180 [11202]
  WEBSTER & BENNETT, BORING BAR, FITS 36" VTL, 12" LONG, 2 1/4" DIAMETER, [10920]
  WEBSTER & BENNETT, BORING BAR, FITS 48", 60" & 72" VTL'S, 12" LONG, 2 1/4" DIA [10921]
  WEBSTER & BENNETT, BORING BAR, FITS 48" 60" & 72, 11" LONG x 3" DIAm [10006]
  WEBSTER BENNETT LEFT BORING BAR 3" X 12", FOR VTL FITS 36", 48", 60" & 72" [10343]
  WEBSTER BENNETT 3"X 12", RIGHT BORING BAR,FOR VTL, FITS 36", 48", 60" & 72" [10344]
WEBSTER & BENNETT, BORING BAR, FITS 36" VTL [10845]
  WEBSTER & BENNETT TURRET TYPE < BORING BAR > FITS 36" VTL'S [8768]
  WEBSTER & BENNETT TURRET TYPE < BORING BAR > FITS 48", 60" & 72" VTL'S [8770]
  12" BUCK THREE-JAW "ADJUSTA-TRU" LATHE CHUCK w/D1-6 MOUNT MODEL#2124R, EXCELLENT [11127]
  30" 3-JAW CHUCK, HORTON, LATHE CHUCK,11 " THRU HOLE, A20 FLAT BACK, [10960]
  32" 3-JAW CHUCK, NOBLE, LATHE, 14" THRU HOLE, A-20 BACK (FLAT BACK), 7 1/2" TK [10961]
  3 1/4" CHUCK JAWS (4) WEBSTER BENNETT, 36" VTL'S ONLY, MODEL 430 RECLAIMED [10274]
  8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER BENNETT, 3 STEP, WILL FIT 36" VTL'S [10768]
  8" TALL CHUCK JAWS SET OF FOUR (4), WEBSTER BENNETT, 3 STEP, WILL FIT 36" VTL'S [10014]
  3 3/4" TALL CHUCK JAWS #821 SET OF (4), WEBSTER BENNETT, WILL FIT 48" 60" 72" [10121]
  3 1/4" CHUCK JAWS (4) WEBSTER BENNETT, 36" VTL, MODEL 430 RECLAIMED W/ HARDWARE [11106]
  CHUCK SCROLLS, WEBSTER BENNETT, VTL, [11065]
  CHUCK SLIPPER, WEBSTER BENNETT, VTL, [11072]
  WEBSTER & BENNETT, CHUCK WRENCH, FITS 36", 48", 60" AND 72", 96", 120, VTL'S [10359]
  WEBSTER & BENNETT < CONTROL PANEL COVER> "GIVE YOUR WEBSTER A FACE LIFT" [8677]
  COOLANT SYSTEM, COOL JET, FLOW RATE 8GPM, 1000 PSI / 70 BAR, 20 FOOT HOSE [10749]
  DIGITAL READOUT, NEWALL, ANY, MODEL 7B211000, 41" SCALE, 36.5" SCALE, [11114]
  < 35" x-axis > SONY LH 51 4-AXIS DIGITAL READOUT SYSTEM (COMPLETE) [10892]
  30" FACING HEAD, 5" GIDDING LEWIS, HBM, THIS UNIT HAS ALL THE GOODIES [11023]
  FACING HEAD, 30" GIDDINGS & LEWIS for 6" SPINDLE, COMPLETE [9197]
  WEBSTER BENNETT, OIL FILTER REPLACABLE ELEMENT (NEW IN BOX) SPECIFY MODEL [10914]
  FLOOR PLATE, 55" x 60" x 9", (5) T-SLOTS WITH COOLANT TROUGH [10512]
  FLOOR PLATE, 55" x 96" x 8" THICK, WITH COOLANT TROUGH, VERY NICE [10494]
  SET OF (4) JAWS, BORING MILL, 4" WIDE JAW, 8"LONG, 3 1/2" TALL, 7" X 6 1/4" BOLT [10661]
12 3/4" ROUND PERMENANT MAGNETIC CHUCK, WALKER, GRINDER, [11217]
  WEBSTER & BENNETT < RECHARGE KIT > NITROGEN GAS COUNTER BALANCE RAM VTL,(RENTAL) [8680]
  SUB TABLE, CAST STEEL, MILL, 32" WIDE X 48" LONG X 8" TALL, T-SLOTTED, EXCELLENT [10144]
  (2) T TYPE TOMBSTONES, 24" WIDE,34" TALL, 10" THICK, TAPPED, PRO PALLET II [8686]
  FABRICATED TURRET TYPE < TOOL HOLDER > FITS 48", 60" & 72" WEBSTER BENNETT VTL'S [10013]
  WEBSTER BENNET,36" & 42" VTL, B2X LONG SHANK ADVANCED TOOL HOLDING SYSTEM [10316]
  ADVANCED TOOL HOLDING SYSTEM, WEBSTER BENNETT, Fits - B2X Tool HOLDERS [10317]
  B TYPE WEBSTER BENNETT, 36" & 42" VTL,ADVANCED TOOL HOLDING SYSTEM [10318]
  B SHORT FLANGE BOX TYPE TOOL HOLDER, WEBSTER BENNETT, 36" & 42" VTL, [10319]
  WEBSTER & BENNETT TURRET TYPE < TOOL HOLDER > B SHORT, FITS 36" VTL'S ONLY [10008]
  WEBSTER & BENNETT TURRET TYPE < TOOL HOLDER > B2X LONG, FITS 48", 60" & 72" VTL [10011]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 36" VTL'S ONLY [10902]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 36" VTL'S ONLY [10903]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 36" VTL'S ONLY [10904]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 36" VTL'S ONLY [10905]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 36" VTL'S ONLY [10906]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 36" VTL'S ONLY [10907]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 36" VTL'S ONLY [10908]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 48", 60" & 72" VTL'S [8704]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2 SHORT, FITS 48", 60" & 72" VTL [8758]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 48", 60" & 72" VTL'S [8705]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 48", 60" & 72" VTL'S [8751]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 48", 60" & 72" VTL'S [10912]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 48", 60" & 72" VTL'S [10910]
  WEBSTER & BENNETT, TOOL HOLDER, TURRET TYPE, B2X LONG, FITS 48", 60" & 72" VTL'S [11126]
  MIMIK 180A, DYNATRACE, HYDRAULIC TRACER UNIT [10341]
  TURRET ASSEMBLY, WEBSTER BENNETT, VTL, TURRETT BINDER, TURRETT STEM, INDEXING [11105]
  WEBSTER & BENNETT, BORING BAR, FITS 36" VTL'S, [8786]
  VERTICAL HEAD, GIDDINGS LEWIS, BORING MILL, #50 TAPER , 30" THROAT DEPTH [10165]
  VERTICAL HEAD, GIDDINGS LEWIS, BORING MILL, #50 TAPER, 24" THROAT DEPTH. [10166]
  LUCAS RIGHT ANGLE MILLING ATTACHMENT, HEAVY DUTY, 400 R.P.M., #50 TAPER [10224]
  LUCAS RIGHT ANGLE MILLING ATTACHMENT, SERIAL NO GOUGED OFF, SEE SPECS [10454]
  LUCAS RIGHT ANGLE MILLING ATTACHMENT, 36" THROAT, ALUMINUM BODY, #50 TAPER [10649]

0U3003   ULTRASONIC CLEANER
  CREST 4HT 24 36-42 ULTRASONIC CLEANING TANK, [11103]

0W0360   WASHERS (INDIVIDUAL BATCH)
  BOWDEN, LIQUID TURBO CHARGER PARTS WASHER SYSTEM, ALLEN BRADLEY PANNEL VIEW 550 [11158]
  RANSOHOFF, No. IMMERSO-JET, 1999, TUMBLE BASKET BATCH WASHING SYSTEM [11132]
  RANSOHOFF, No. LEAN-JET, 2009, 140 GAL WASH, 140 GAL RINSE, [11131]

0W3752   WELDING POSITIONERS
  1100 Lb., RANSOME, No. 10TT, 25.5" DIA. TABLE, VARI DRIVE W/ FOOT PEDAL CONTROLS [11121]
  6000 Lb., RANSOME, No. 60P, ROTATE & TILT WELDING POSITIONER, HEAVY DUTY [10694]
  1,000 Lb., RANSOME, No. 10P, 30.25" DIA TABLE, TRANSFORMER [11086]
  4,000 Lb., RANSOME, No 40P, 41.5" DIA TABLE, VARIABLE SPEED, 220 V,PENDANT CNTS. [11085]

Please complete the form below so we have accurate contact information to give your request the consideration it deserves. At the minimum, we need company name, your name, and your email address.

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?

Please enter text from above:

Return to previous page