All Reasonable Offers Considered - Let's Make a Deal

For a quote or more information on the items shown, check the boxes as appropriate and fill in your contact information at the bottom of the screen.

SELLERS, No. 4G, 220, 1 H.P., [11130]

See picture/specification       Check for more info

 
1 1/4", ACME GRIDLEY, No. RA-6, BAR MACHINE, WITH CROSS DRILLING ATTACHMENT 5TH [11129]

See picture/specification       Check for more info

 
1 1/4", ACME GRIDLEY, No. RA-6, SLOT FEED COLLET CHUCKER, [11128]

See picture/specification       Check for more info

 
12" BUCK THREE-JAW "ADJUSTA-TRU" LATHE CHUCK w/D1-6 MOUNT MODEL#2124R, EXCELLENT [11127]

See picture/specification       Check for more info

 
14" x 48" ANGLE PLATE, FABRICATED, T-SLOTTED, SCRAPED IN, PAINTED, VERY NICE ! [11077]

See picture/specification       Check for more info

 
CHUCK SLIPPER, WEBSTER BENNETT, VTL, [11072]

See picture/specification       Check for more info

 
CHUCK SCROLLS, WEBSTER BENNETT, VTL, [11065]

See picture/specification       Check for more info

 
150 Ton, MINSTER, 6" STRK, 6" SH HT, 4" BOLSTER, AIR CLUTCH, CUSHIONS, UND PWR [11047]

See picture/specification       Check for more info

 
36", BLANCHARD, No. 18, ELECTRO MAGNETIC CHUCK CONTROLS, GAURDS [11028]

See picture/specification       Check for more info

 
36", BLANCHARD, NO. 18, ELECTRO MAGNETIC CHUCK CONTROL 36" CHUCK [11027]

See picture/specification       Check for more info

 
30", BLANCHARD, No. 18,Model CEDV 10-20841, CHUCK CONTROL, [11026]

See picture/specification       Check for more info

 
48", WEBSTER BENNETT, No. EH, 48" UNDER RAIL, 100 R.P.M., NEWALL DRO, [11024]

See picture/specification       Check for more info

 
30" FACING HEAD, 5" GIDDING LEWIS, HBM, THIS UNIT HAS ALL THE GOODIES [11023]

See picture/specification       Check for more info

 
18" x 72", CINCINNATI, UNIVERSAL, SWING DOWN INTERNAL ATTACHMENT BRACKET [10992]

See picture/specification       Check for more info

 
HELMEL, MICROSTAR 1272, 2017, 72" WIDE X 120" LONG X 43" UNDER RAIL, RENISHAW [10976]

See picture/specification       Check for more info

 
32" 3-JAW CHUCK, NOBLE, LATHE, 14" THRU HOLE, A-20 BACK (FLAT BACK), 7 1/2" TK [10961]

See picture/specification       Check for more info

 
30" 3-JAW CHUCK, HORTON, LATHE CHUCK,11 " THRU HOLE, A20 FLAT BACK, [10960]

See picture/specification       Check for more info

 
"MAYFRAN CHIP-TOTE, 1999, USABLE AREA 51" X 17", 11"BELT, 125" OVERALL LENGTH [10948]

See picture/specification       Check for more info

 
SET OF (4) JAWS, BORING MILL, 4" WIDE JAW, 8"LONG, 3 1/2" TALL, 7" X 6 1/4" BOLT [10661]

See picture/specification       Check for more info

 
LUCAS RIGHT ANGLE MILLING ATTACHMENT, 36" THROAT, ALUMINUM BODY, #50 TAPER [10649]

See picture/specification       Check for more info

 
FLOOR PLATE, 55" x 60" x 9", (5) T-SLOTS WITH COOLANT TROUGH [10512]

See picture/specification       Check for more info

 
BOLSTER PLATE, STEEL, PRESS OR MACHINE FLOOR PLATE, 21" x 48" x 2", (4) T-SLOTS [10511]

See picture/specification       Check for more info

 
FLOOR PLATE, 55" x 96" x 8" THICK, WITH COOLANT TROUGH, VERY NICE [10494]

See picture/specification       Check for more info

 
LUCAS RIGHT ANGLE MILLING ATTACHMENT, SERIAL NO GOUGED OFF, SEE SPECS [10454]

See picture/specification       Check for more info

 
LUCAS RIGHT ANGLE MILLING ATTACHMENT, HEAVY DUTY, 400 R.P.M., #50 TAPER [10224]

See picture/specification       Check for more info

 
SUB TABLE, CAST STEEL, MILL, 32" WIDE X 48" LONG X 8" TALL, T-SLOTTED, EXCELLENT [10144]

See picture/specification       Check for more info

 
FACING HEAD, 30" GIDDINGS & LEWIS for 6" SPINDLE, COMPLETE [9197]

See picture/specification       Check for more info

 
(2) T TYPE TOMBSTONES, 24" WIDE,34" TALL, 10" THICK, TAPPED, PRO PALLET II [8686]

See picture/specification       Check for more info

 
COOLANT SYSTEM, COOL JET, FLOW RATE 8GPM, 1000 PSI / 70 BAR, 20 FOOT HOSE [10749]

See picture/specification       Check for more info

 
5", G & L 70-G5-T 3-AXIS, G & L 400 CONTROL, [10722]

See picture/specification       Check for more info

 
4", DEVLIEG 43J60, CNC JIG MILL, 60"X-AXIS, 40" Y-AXIS, DELTA DYNA-PATH CONTROL [10721]

See picture/specification       Check for more info

 

Please complete the form below so we have accurate contact information to give your request the consideration it deserves. At the minimum, we need company name, your name, and your email address.

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?

Please enter text from above:

Return to previous page