17" x 120" cc, CINCINNATI HYDRA-SHIFT, TAPER ATTACHMENT, 4-JAW CHUCK, TOOL POST   Our stock number: 10739

17 x 120 cc, CINCINNATI HYDRA-SHIFT, TAPER ATTACHMENT, 4-JAW CHUCK, TOOL POST

Click on picture below for larger version
17 x 120 cc, CINCINNATI HYDRA-SHIFT, TAPER ATTACHMENT, 4-JAW CHUCK, TOOL POST17 x 120 cc, CINCINNATI HYDRA-SHIFT, TAPER ATTACHMENT, 4-JAW CHUCK, TOOL POST17 x 120 cc, CINCINNATI HYDRA-SHIFT, TAPER ATTACHMENT, 4-JAW CHUCK, TOOL POST17 x 120 cc, CINCINNATI HYDRA-SHIFT, TAPER ATTACHMENT, 4-JAW CHUCK, TOOL POST

SPECIFICATIONS:
SWING OVER BED..................................... 17"
SWING OVER CROSS SLIDE............................. 11 3/4"
DISTANCE BETWEEN CENTERS (MAX. TURNING LENGTH)..... 120"
SPINDLE SPEEDS..................................... 12
SPINDLE SPEED RANGE, HIGH.......................... 25 - 980 RPM
SPINDLE REVERSE.................................... ELECTRICAL
SPINDLE NOSE - STANDARD LONG TAPER KEY DRIVE....... L-1
SPINDLE - DIAMETER OF HOLE THRU.................... 1 3/4"
SPINDLE - SIZE OF CENTER........................... #4 MORSE
BED WIDTH.......................................... 13 7/8"
BED DEPTH.......................................... 10 7/8"
NUMBER OF THREAD AND FEED CHANGES.................. 48
RANGE OF TPI, LOW, STANDARD AND HIGH SPEED RANGES.. 1 1/2 - 92
RANGE OF FEEDS - CARRIAGE, LOW, STANDARD & HIGH.... 0.0019 - 0.1215 IPR
LEADSCREW (ACME) DIAMETER IN INCHES AND TPI........ 1 3/8" - 6
CROSS SLIDE TRAVEL................................. 12"
TOP SLIDE TRAVEL................................... 3 1/4"
TOOL HOLDERS - SIZE OF TOOL SHANK, INCHES AND #.... 5/8" x 1 3/8" (#2)
CARRIAGE BEARING ON WAYS........................... 22 3/8"
WIDTH OF BRIDGE.................................... 7 1/2"
TAILSTOCK:
SPINDLE TRAVEL..................................... 5"
SPINDLE DIAMETER................................... 2 1/4"
SPINDLE - SIZE OF CENTER........................... #4 MORSE
TAILSTOCK SETOVER, EITHER SIDE OF CENTER........... 1/2"
TAPER ATTACHMENT:
MAX. TAPER PER FOOT................................ 4"
MAX. TURNING LENGTH AT ONE SETTING................. 16"
MAX. INCLUDED ANGLE................................ 18 DEGREES
MOTOR.............................................. 5 HP
APPROX. DIMENSIONS................................. 48" X 48" X 144"
APPROX. WEIGHT..................................... 5000 LBS

EQUIPPED WITH:
4-JAW CHUCK
TAPER ATTACHMENT
TOOL POST
TAILSTOCK
CHIP PAN

SPECIFICATIONS SUBJECT TO VERIFICATION





For a quote on this machine, please complete the form below or contact us directly.

Company:
Contact:
Email:
Address:
City St ZIP:
Tel:
Fax:

How did you hear of us?
Additional information on your request:
   

RETURN to complete inventory display       RETURN to our home page