349 CFM, 140 PSI, QUINCY, No. QMA 75, 75 HP, 1989, w/ DUAL AIR DRYER UNITS   Our stock number: 9289

349 CFM, 140 PSI, QUINCY, No. QMA 75, 75 HP, 1989, w/ DUAL AIR DRYER UNITS

Click on picture below for larger version
349 CFM, 140 PSI, QUINCY, No. QMA 75, 75 HP, 1989, w/ DUAL AIR DRYER UNITS349 CFM, 140 PSI, QUINCY, No. QMA 75, 75 HP, 1989, w/ DUAL AIR DRYER UNITS

MODEL: QMA 75
NEW: 1989
APPROX. 43000 HOURS

SPECIFICATIONs:

COMPRESSOR DRIVE MOTOR.................... 75 HP
INLET CAPACITY............................ 346 ACFM
FULL LOAD OPERATING PRESSURE.............. 125 PSIG
MAX. OPERATING PRESSURE................... 140 PSIG
MIN. OPERATING PRESSURE................... 75 PSIG
MAX. AMBIENT OPERATING TEMP............... 110 DEGREES F
MIN. AMBIENT OPERATING TEMP............... 35 DEGREES F
SERVICE LINE CONNECTION SIZE.............. 2.0 IN/NPT
ROTOR DIAMETER............................ 204 MM
MALE ROTOR SPEED.......................... 2662 RPM
FEMALE ROTOR SPEED........................ 1725 RPM
ROTOR TIP SPEED........................... 28.4 M/SEC

COOLING DATA:

HEAT REJECTION - FLUID COOLER............. 3126 BTU/MIN
AFTERCOOLER............................. 699 BTU/MIN
AFTERCOOLER APPROACH (@STD. CONDITIONS)... 15 DEGREES F
MAX. ALLOWABLE STATIC BACKPRESSURE........ 0.125 IN H2O
FAN MOTOR................................. 2 HP
FAN MOTOR................................. 1725 RPM
FAN FLOW.................................. 6720 CFM

COMPRESSOR COOLED DATA:

FLUID FLOW................................ 27.7 GPM
TOTAL FLUID CAPACITY...................... 19 GAL
RESERVOIR FLUID CAPACITY.................. 17 GAL
TOTAL RESERVOIR VOLUME.................... 10.5 CU. FT.
NORMAL AIREND DISCHARGE TEMP.............. 175 - 195 DEGREES F
TYPICAL FLUID CARRYOVER................... 1 - 3 PPM

SOUND DATA (AT 1 METER):
PARTIAL ENCLOSURE......................... 87 DB(A)
SOUND ENCLOSURE........................... 81 DB(A)
LOW SOUND ENCLOSURE....................... 79 DA(A)

TYPICAL ENERGY DATA:

FULL LOAD DRIVE MOTOR HP.................. 89.3 BHP
UNLOADED DRIVE MOTOR HP................... 17.3 BHP
FAN MOTOR HP.............................. 2.0 BHP
DRIVE MOTOR SERVICE FACTOR................ 1.25
DRIVE MOTOR SPEED......................... 1725 RPM

APPROX. DIMENSIONS........................ 110" X 43" X 67"


EQUIPPED WITH:

PNEUMATECH PH SERIES DRYERS
SPECIFICATIONS:
PROCESS: COMPTRSSED AIR
CAPACITY: 750 SCFM (1275 NM3/HR)
OPERATING PRESSURE: 100 PSIG (6.8 KG/CM2G)
OPERATING TEMPERATURE: 100 DEG. F (38 DEG. C)
DESIGN PRESSURE: 150 PSIG @ 450 DEG. F (VESSELS)
(10.55 KG/CM2G AT 232 DEG. C) (VESSELS)
OUTLET DEW POINT: -40 DEG. F (-40 DEG. C)
PURGE FLOW: 106 SCFM (180 NM3/HR)
PURGE CONTROL SET: 45 PSIG (3.06 KG/CM2G)
POWER SUPPLY: 115/1/60
NEMA CLASS: NEMA-4
NEMA CYCLE: 10 MINUTES
DESICCANT #1: 370# (168 KG)/TOWER ACTIVATED ALUMINA 1/8
DESSICANT #2: 90# (41 KG)/TOWER ACTIVATED ALUMINA 1/4

"AS IS," LOADED ON TRUCK

SPECIFICATIONS SUBJECT TO VERIFICATION







Get a Quote

Company:
Contact:
Email:
Tel:
Address:
City St ZIP:
Fax:

How did you hear of us?
Additional information on your request:
   

Please enter text from above:

Return to previous page