BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
.08 - 3/4"Dia, IEMCA Elite 220, 12', for Sliding Headstock - NEW
General Specifications per Brochure:
Bar Size Capacity: 2mm (.08") - 23mm (.906")
Bar Length Capacity: 12'
Maximum Bar Length: 12' 2"
Minimum Bar Length: 63" (15.75" available option)
Magazine Capacity: 40 bars up to .25" diameter,
16 bars up to .787" diameter.
Maximum Remnant Length: 15.75"
Operating Voltage: 230V AC 3 Phase (400V available)
Control Voltage: 24 Volts DC
Total Power Required: 2.5 kVA/1.8 kW
Compressed Air Required: 90 psi, 10 cfm
Guide Channel Oil: ISO FD10, quantity 15 gal. (not incl.)
Feeding Speed: 39"/sec (Adjustable)
Facing Accuracy: +/- .008"
Bar Change Time: 19 seconds for 12' bar
Bar Straightness Required: .007"/foot
Bar Feeder Shipping Weight: 1500 lbs.
Color: RAL 5002 Blue, RAL 7035 Light Gray
Standard Equipment Includes:
Custom Electrical Cable Package & Interface Kit
Walking Beam & Gravity Type Mag. both included
Guide Channel Set includes
1 bar pusher, 1 nose, 1 rotating tip, 1 collet
Options (prices subject to cahnge without notice)
Elite 220/12 with two (2) complete guide
channel sets which includes 2 bar pushers,
2 rotating tips, 2 collets, 2 noses and
1 spindle liner: $ 35,900.00
Elite 220/12 with three (3) complete guide
channel sets which includes 3 bar pushers,
3 rotating tips, 3 collets, 3 noses and
2 spindle liners: $ 37,500.00
Iemca's Tool Box $ 1,800.00
Category III Interface: $ 1,400.00
Special Adaptation Kit: $ 1,600.00
Anti-Vibration Device: $ 1,600.00
(Recc for Bushing-less Swiss with
with a spindle bore less than 32mm,
lathe headstock stroke exceeding a 6"
Stroke and when running "soft" materials)
IEMCA/Bucci USA Installation: $ 3,100.00
Includes labor, travel expenses and 12 month warranty
Bar Feeder installation does not include lathe-side software or hardware for
magazine bar feeder interface. This interface must be supplied and installed
by the lathe OEM or Distributor, prior to bar feeder installation. Maximum
Bar diameters are for front ejection of the remnant. For remnant retraction,
maximum diameters are slightly less. Bar straightness, proper guide channel
selection, correct alignment and anchoring of bar feeder will ensure optimum
performance at maximum rpm.
Automatics & Machinery Co Inc
150 Martin St
Longmont CO 80501-5939
Email (Request Quote):