BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
.197" - 2"Dia, IEMCA Boss 552 HD, 12', Fixed/Sliding Headstock, NEW
General Specifications per Brochure
Bar Size Capacity: 5mm (.197") - 51mm (2.008")
Bar Length Capacity: 12'
Maximum Bar Length: 12' 4"
Minimum Bar Length: 39"
Magazine Capacity: 11 linear inches
Maximum Remnant Length: 15.75"
Operating Voltage: 230V AC 3 Phase (400V available)
Control Voltage: 24 Volts DC
Total Power Required: 2.5 kVA/2kW
Compressed Air Required: 90 psi, 10 cfm
Guide Channel Oil: ISO 150, quantity 15 gals. (not incl.)
Feeding Speed: 20"/sec Max. (adjustable)
Facing Accuracy: +/- .020"
Bar Change Time: 27 seconds for 12' bar
Bar Straightness Required: .007"/foot
Bar Feeder Shipping Weight: 2090 lbs.
Color: RAL 5002 Blue, RAL 7035 Light Gray
Standard Equipment Includes:
Custom Electrical Cable Package & Interface Kit,
Remnant Retract, Bushing Device
Guide Channel Set includes
1 bar pusher, 1 nose, 1 rotating tip, 1 split bushing,1 collet
Options (Subject to change without notice)
Boss 552/HD with two (2) complete guide channel sets which
includes 2 bar pushers, 2 rotating tips, 2 collets, 2 noses, 2 split
bushings and 1 spindle liner: $45,500.00
Boss 552/HD with three (3) complete guide channel sets
which includes 3 bar pushers, 3 rotating tips, 3 collets, 3 noses
3 split bushings and 2 spindle liners: $47,500.00
Iemca's Tool Box: $ 1,800.00
Axial Shift Device: $ 1,875.00
Category III INterface: $ 1,400.00
Special Adaptation Kit: $ 1,600.00
Swiss lathe Addaptation Kit: $ 2,600.00
Outboard Bushing Device: $ 2,900.00
(Recc for bushing-less Swiss
Swiss with a spindle bore greater
than 32mm with greater than 6" stroke,
or when running "soft" materials)
IEMCA/Bucci USA Installation: $ 3,100.00
Includes labor, travel expenses and 12 month warranty
Bar Feeder installation does not include lathe-side software or hardware for
magazine bar feeder interface. This interface must be supplied and installed
by the lathe OEM or Distributor, prior to bar feeder installation. Maximum
Bar diameters are for front ejection of the remnant. For remnant retraction,
maximum diameters are slightly less. Bar straightness, proper guide channel
selection, correct alignment and anchoring of bar feeder will ensure optimum
performance at maximum rpm.
Automatics & Machinery Co Inc
150 Martin St
Longmont CO 80501-5939
Email (Request Quote):