BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
New FMB Minimag 20, 2mm to 20mm x 12', for Fixed or Sliding Headstock
General Specifications as per Brochure:
Bar diameter capacity: 2mm to 20mm (.078" - .787")
Max. bar length: 3800mm (12' 5")
Min. bar length: 10000mm (39.4")
magazine remnant length: 420mm (16.5")
Magazine rack capacity: 7"
Bar loading cycle time: 17 seconds for 12' bar
Material straightness specification: .007" TIR/foot of material
(V blocks, 3 points equidistant)
Feed force (pusher torque): max. 300 N, adjustable
Forward feed rate: 710 IPM, adjustable
Return feed rate: 1420 IPM, adjustable
Power consumption: 1.5 kw
Operating voltage: 230V/60HZ 3-phase
Control voltage: 24V DC
Oil capacity: 50 liters (13.2 gallons)
Oil viscosity: ISO 100 cST
Compressed air supply: 6 bar (90 psi)
Compressed air consumption: approx. 3 liters per loading cycle
Weight (approx.): 1,650 lbs
(1) Guide channel set of your choice (channel sections, pusher &
(1) Universal telescopic nose with I.D. liner
(1) O.D. bar stock pusher collet
(1) Custom lathe cable & interface plug
(1) Polyurethane bushing blocks (one set includes upper & lower pieces)
Swiss Headstock Synchronization Device
Automatic Remnant Retraction, Self Centering Gripper
FMB Minimag 20 12' 2 Guide Channel Set Complete Package
Includes (2) Channel Sets, (2) Pushers, (2) Nose Liners,
(2) Pusher Collets & (2) Sets of Bushing Blocks $31,295.00
Optional Accessories - Prices Subject to Change:
(includes labor and travel expenses to most areas in North America)
Additional Guide Channel Sets: $2,675.00 ea
(includes pusher, revolving tip, nose liner & spindle liner)
Additional Spindle Liners: $420.00 ea.
(needed when selecting a guide channel set whose max. bar diamater is
smaller than the draw tube of the lathe)
Additional Bar Stock Collets: $90.00 ea.
Polyurethane Support Blocks: $90.00 ea.
(one set includes upper & lower pieces)
Second Movable Anti-Vibration Device: 2,400.00 ea.
Bar Feeder installation does not include lathe-side software or hardware
interface. This interface must be supplied and installed by the lathe
OEM or dealer prior to bar feeder installation.
The anchoring of the FMB bar feeder to the floor is a requirement and will be
performed by the service technician.
Automatics & Machinery Co Inc
150 Martin St
Longmont CO 80501-5939
Email (Request Quote):